1P08 BASES: 11-7/8 X 12 "B" SERIES MOLD BASE

 
Guided Ejection = .750 Diameter ( 2 places )

Clamp Type Locating Ring installed

Standard 1 " Diameter Sprue Bushing included

.375 Diameter Sprue puller pin included

5/8-11 eyebolt holes, 2 in Hot Half & 2 in Ejector Half

Press Knock-out holes, 4 places - 3.500 off center

With ½-13 tapped holes in the Ejector plate

Part Number

1P122828
A Plate = 2.875, Pocket Depth = 1.500
B Plate = 2.875, Pocket Depth = 1.000

1P122838
A Plate = 2.875, Pocket Depth = 1.500
B Plate = 3.875, Pocket Depth = 2.000

1P123828
A Plate = 3.875, Pocket Depth = 2.500
B Plate = 2.875, Pocket Depth = 1.000

1P123838
A Plate = 3.875, Pocket Depth = 2.500
B Plate = 3.875, Pocket Depth = 2.000

2B123828
Two Cavity
3.875 Through Bore .50 Long
4.000 Step
4.3125 C'Bore .375 deep

4B123828
Four Cavity
2.875 Through Bore .50 Long
3.000 Step
3.25 C'Bore .3125 deep

8B123828
Eight Cavity
1.875 Through Bore .50 Long
2.000 Step
2.1875 C'Bore .250 deep

HOW TO READ PART NUMBERS

                                    1P    12    28    38
                                    _     _     _     _
Style 1P = Pocket, 2B = Bore, etc.._|     |     |     |
Length of Base____________________________|     |     |
Thickness of A-Plate____________________________|     |
Thickness of B-Plate__________________________________|

Our complete Timesaver ® manual in Word97 DOC format File Size = 936 KB
Our complete Timesaver ® manual in Acrobat PFD format File Size = 2.8 MB